Physical Properties
- Appearance
Yellow liquid
- Specific gravity
SUPERCLEAN
The SUPERCLEAN additive is a 3 en 1 chemical for one-stage wellbore cleaning during cementing operations. It acts with high effectiveness in removing the buildup created by oil-based fluids, leaving the formation wetted with water to achieve strong cement bonding between the casing pipe and the formation.
It combines the dissolution of powerful hydrocarbon solvents with the ability to wet in water using optimized surfactants, delivering a hydrophilic-lipophilic balance (HLB) and creating a double emulsion.
The SUPERCLEAN product meets all the requirements of a washing train in a single batch spacer with just one product. This efficient combination of potent solvents, surfactants, and wetting agents not only provides excellent surface cleaning but also does so with a profile ranging from good to very good. When used in well-cleaning operations, its double emulsion achieves the task of diluting, dissolving, and dispersing oil/synthetic-based residues, while simultaneously wetting tubular and metal surfaces with water.
APPLICATION
The combined action of solvents and surfactants with SUPERCLEAN's double emulsion provides efficient cleaning of solids and drilling fluid residues during cementing operations, leaving all tubulars and the formation in a wet state with water, without the need to add an additional surfactant spacer.
The SUPERCLEAN additive can be mixed with freshwater, seawater, and high-density brines. Gentle agitation is required before pumping. The product can also be incorporated into a high-viscosity spacer to assist in removing heavy solids before pumping the main cleaning spacer or as an aid in the displacement train.
ADVANTAGE
- Improves Cement Adhesion by wetting the formation and casing pipe with water.
- Low Concentration - Only one product is used, and the concentration is lower than other surfactants to achieve the same job.
- Reduced Pill Volume.
RECOMMENDED TREATMENT
The SUPERCLEAN additive is primarily designed to remove buildup from oil-based or synthetic-based fluids and leave the casing pipe and formation wetted with water during cementing operations in oil and gas wells. LOCIMAT recommends concentrations of 5 – 20% v/v in the main cleaning spacer.
TOXICITY AND HANDLING
Handle it as an industrial chemical, using protective equipment, and adhere to the precautions outlined in the Material Safety Data Sheet (MSDS).
PACKAGING AND STORAGE
- The SUPERCLEAN additive is packaged in 208-liter drums. Keep the drums tightly sealed to prevent contamination. Keep away from sparks and flames.
